Laser IPL Permanent Hair Removal Machine Painless Face Body Shaving Epilator Kit

 

Specification:
Lamp tube:Xenon quartz tube
Light source: Intense Pulsed Light
Energy Frequency:1.5J/cm²
Focus size:33*10mm²
Wave length:470nm~1100nm
Lamp tube life:150000 times
Operating temperature range:5~30℃
Operating humidity range: Relative humidity 30%~60%

Function introduction:
-Hair removal
-Skin rejuvenation

Instructions for use:
1.Use a medical alcohol wipe to clean the glass window
2.Press the “Power button” for 1 second, it will start and enter into the working state
3.Click the “Power button” to select the suitable intensity level , there are five intensity levels indicated with the blue indicator lights. The diagram below shows intensity level from low to high power, level 1 is the minimum power setting,level 5 is maximum power intensity. Any adjustment can be made in the sequence shown with a click of the power button.
4. Once the intensity level is set, move the flash window to the skin which can cover the flash window completely, you will see the red indicator light dickering and then click the flash button, the device will flash one time; After every flash operation the red indicator light will be turned off to charge the power, after 1~3 seconds the light will return to indicating that it is ready for use again.
5.Press the power button for 3 seconds to shut down it.(When finished using, please clean the flash window using the suggested medical alcohol wet-wipe)

This product can be used for:excess hair such as lip hair, armpit hair, limb body hair, forehead hair .Painless hair removal at your service.